Skip to content

Method StatementACT-062-MSR00Available

Floor Tiling Method Statement

Floor Tiling (Ceramic / Porcelain)Architectural

ACT-062 / MS / R00

Floor Tiling Method Statement

Fictional demonstration project: SiteQuality Courtyard. Adapt to the approved project documents before use.

Scope and approved documents

  • Porcelain or ceramic tile finishes to released floor substrates, including thresholds, trims, movement joints and protection.
  • Approved layout, specification, material approval and manufacturer system instructions: ____________________

Responsibilities and prerequisites

  • Assign supervisor, tiling crew and QC inspector: ____________________
  • Record tile batch/calibre, compatible adhesive, grout, joint materials, spacers and calibrated straightedge or level.
  • Confirm substrate release, services coordination, datum and protection of adjacent works. Record approved tolerances: ____________________

Sequence and inspection

  • Dry-set first bays and align with doors and control joints. Obtain mock-up release before production.
  • Prepare substrate and apply the approved adhesive system. Lift a sample tile to verify transfer against project requirements.
  • Set units to datum and finish line; verify joints, cuts, falls and lippage before grout. Keep movement joints free of rigid material.
  • Grout and seal as approved, clean without damaging finishes, and protect the completed bays.

Records and approval

  • Substrate release / mock-up / batch traceability / WIR / protection photographs: ____________________
  • Prepared / reviewed / approved by and date: ____________________

Preview shown in full. The downloaded DOCX, XLSX and PDF are generated from this record.

Other documents for this activity

5